HP color laserjet 3000n Manuale Utente

ENWW

The EIO (enhanced input/output) menu appears only when an EIO 
device is installed (such as an HP Jetdirect print server). If the printer 
contains an HP Jetdirect print server, you can configure basic 
networking parameters using the EIO menu. Network printer 
administrators can also use HP Web Jetadmin to configure these and 
other parameters remotely. 

The items available on the menu vary depending on the particular 
print server that is installed.

TCP/IP

ENABLE
CONFIGURE 
METHOD

This item allows you to enable or 
disable the TCP/IP menu and set the 
TCP/IP protocol parameters. 
In the TCP/IP menu, you can specify 

BOOTP=YES

 or 

DHCP=YES

 for TCP/IP 

parameters to be automatically 
configured by a BootP or DHCP server 
when the printer is turned on. 
If you specify 

BOOTP=NO

 and 

DHCP=NO

, you can manually set the 

following TCP/IP parameters from the 
LCD control panel: 

z

Each byte of the IP address (IP) 

z

Subnet Mask (SM) 

z

Syslog Server (LG) 

z

Default Gateway (GW) 

z

Idle Timeout period (default is 270 
seconds; 0 disables the timeout) 

When setting IP numbers, press 

 (up 

arrow button) to increase the number 
by 1. Press 

 

(down arrow button) to 

decrease the number by 1. Press   
(select button)

 

to make your selection.