HP color laserjet 2550 series Manuale Di Servizio

4. Unplug the E-label reader connector (callout 2) from the dc controller.

Examine the cable routing as you lift the E-label reader from the printer.

1. Remove the following covers:

●

Right- and left-side covers (see 

)

●

Front lower cover (see 

2. Open tray 1.

3. Press the multipurpose-roller cover (not shown) inward toward the printer, and then

grasp the top edge to remove it.

4. Lift tray 1 slightly to align the notch (callout 1) in the tray 1 cover (callout 2) with the

hinge pins of the tray 1 hinges (callout 3).

5. Push the left tray 1 hinge to the right while pulling the tray 1 cover to the left to carefully

disengage the hinge pin from the tray 1 cover.

6. Disengage the right tray 1 hinge (callout 4) from the tray 1 cover.

ENWW

Removal and replacement