HP color laserjet 2550 series Manuale Di Servizio
6. Lift the rotary-drive assembly straight up to remove it from the printer.
5
Figure 5-40.
Removing the rotary-drive assembly (3 of 3)
Reinstallation tip
Insert the metal protrusion at the back of the rotary-drive assembly into the slot in the
rear frame assembly and then lower the rotary-drive assembly into position over the
alignment pins. Make sure that no cables are pinched.
rear frame assembly and then lower the rotary-drive assembly into position over the
alignment pins. Make sure that no cables are pinched.
Top plate
1. Remove the following covers and assembly:
●
Right- and left-side covers (see
)
●
)
●
Formatter cage (see
)
●
Back cover (see
●
Top cover (see
)
2. Remove the air duct (see
3. Unplug the flat flexible cable (callout 1) from the laser/scanner.
4. Release the cables from one cable-holder (callout 2).
5. Unplug one cable connector (callout 3) by pressing and releasing the tab on the side of
the connector.
142
Chapter 5 Removal and replacement
ENWW