HP color laserjet 4500 Manuale Utente
EN
Media requirements 93
5
Non-supported media
Use the following guidelines to avoid poor print quality or damage to
your printer:
your printer:
•
Do not use paper that is too rough.
•
Do not use paper that is embossed or coated unless it is specifically
recommended for use in the HP Color LaserJet printers.
recommended for use in the HP Color LaserJet printers.
•
Do not use paper with cutouts or perforations other than standard
3-hole punched paper.
3-hole punched paper.
•
Do not use multipart forms.
•
Do not use paper with irregularities such as tabs or staples.
•
Do not use letterhead paper with low temperature dyes or
thermography. Preprinted forms or letterhead must use inks that can
tolerate temperatures of 190° C (374° F) for 0.1 second.
thermography. Preprinted forms or letterhead must use inks that can
tolerate temperatures of 190° C (374° F) for 0.1 second.
•
Do not use any media that produces hazardous emissions, or that
melts, offsets, or discolors when exposed to 190° C (374° F) for 0.1
second.
melts, offsets, or discolors when exposed to 190° C (374° F) for 0.1
second.
•
Do not use paper that has already been printed on or fed through a
photocopier or printer.
photocopier or printer.
•
Do not use paper with a watermark if you are printing solid patterns.
•
Do not duplex on glossy paper. Doing so will result in paper jams
and print quality problems.
and print quality problems.
•
Do not use transparencies that are not specified for use with HP
Color LaserJet printers.
Color LaserJet printers.
Printing on special media
Use these guidelines when printing on special types of media.
For optimum results, use conventional 75 g/m
2
(20 lb) xerographic
paper. Verify that the paper is of good quality and is free of cuts, nicks,
tears, spots, loose particles, dust, wrinkles, curls, or bent edges.
tears, spots, loose particles, dust, wrinkles, curls, or bent edges.