HP compaq fp 1906 Manuale Utente

Setting Up the Monitor 

3. Remove the three screws 2 as shown in the following 

illustration. 

Removing the Monitor Base 

Ä

CAUTION: Ensure that the bottom of the monitor base is positioned 
over a table or desktop before removing the base from the monitor. 

4. Remove the monitor base 3 from the monitor. 

Mounting the Monitor 

1. Remove the monitor base. Refer to “Removing the Monitor 

Base” steps in the previous section. 

After the base is removed from the monitor, four threaded 
mounting holes are exposed on the monitor back panel to be 
used for mounting purposes. These mounting holes are 
100mm apart and are compliant with the Video Electronics 
Standards Association (VESA) standard for mounting flat 
panel displays. 

User Guide 

3–7