HP color laserjet 9500mfp Manuale Utente

Use the Job Storage Mode options on the HP color LaserJet 9500mfp to store documents at the
product and then control their printing at the product control panel. This feature is intended to provide
greater flexibility, convenience, security, and cost savings.

The HP color LaserJet 9500mfp offers the following Job Storage Mode options:

■

■

■

■

■

■

Require PIN to Print (available when Stored Job is selected)

These options and the settings that control them are described below.

When selected, this option turns the Job Storage feature off (it is disabled), which means that the
print job will not be stored in the product.

To use the Proof and Hold  option, Job Storage must be enabled.

When selected, this option stores the print job in memory and prints only the first copy of the job,
allowing you to check the first copy. If the document prints correctly, you can print the remaining
copies of the print job at the control panel. You can set the number of proof-and-hold print jobs that
can be stored in the product at the control panel.

After it is released for printing, the proof-and-hold job is immediately deleted from the product. If
more copies are needed, you must reprint the job from the software program. If you send a second
proof-and-hold job to the product with the same user name and job name as an existing proof-and-
hold job (and you have not released the original job for printing), the job will overwrite the existing
job. Proof-and-hold jobs are deleted if you turn off the product.

The product configuration can be set to hold a maximum of 50 quick-copy or proof-

and-hold jobs. The number is set at the product control panel in the CONFIGURATION menu,
and the default is 32. When this preset limit is reached, the new document overwrites the
oldest held document. Also, a document that has the same user and job name as one that is
already stored on the hard disk will overwrite the existing document.

To use the Private Job option, Job Storage must be enabled.

When you select Private Job, the print job is sent to the product, but is not printed until you request
the job at the product control panel. Selecting Private Job activates the PIN text box. The print job
can be printed only after you type the correct PIN at the control panel. After the job is printed, the job
is deleted from the product. This feature is useful when you are printing sensitive or confidential
documents that you do not want to leave in an output bin after printing.

166

3 HP traditional print drivers for Windows