HP consumer dv7-6b56nr notebook a1t84uar#aba Manuale Utente

Memory module

Before removing the memory module, follow these steps: 

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, 

and then shut it down through the operating system. 

2. Disconnect all external devices connected to the computer. 

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then 

unplugging the AC adapter from the computer. 

4. Remove the battery (see 

). 

5. Remove the primary hard drive cover (see 

).

Remove the memory module:

✎

This computer has both primary and expansion memory module slots. The top memory module slot is for 
expansion memory and the bottom slot is for primary memory. The following procedure can be used to remove 
memory modules from either slot.

1. Spread the retaining tabs 1 on each side of the memory module slot to release the memory module. (The edge 

of the module opposite the slot rises away from the computer.)

2. Remove the module 2 by pulling it away from the slot at an angle.

✎

Memory modules are designed with a notch 3 to prevent incorrect insertion into the memory module slot.

Reverse this procedure to install a memory module.

4096-MB SDRAM (DDR2, 800-MHz, PC2-6400, 1-DIMM)

582087-001 

2048-MB (DDR2, 800-MHz, PC2-6400, 1-DIMM)

582086-001

1024-MB (DDR2, 800-MHz, PC2-6400, 1-DIMM)

582085-001