HP digital sender 9200c Manuale Di Servizio

Because the digital sender cannot print its information pages, they must be viewed by using the
digital-sender control panel or by using the embedded Web server (EWS). 

Follow these instructions to view the digital-sender information pages:

Press the 

M

ENU

 button on the control panel.

Touch the INFORMATION menu.

Touch SHOW CONFIGURATION.

Use the scroll bar to scroll down through the configuration information. Touch NEXT to view the
EIO/Jetdirect information.

To view the EWS Web pages, you need to have the IP address for the device. You can find the IP
address in one of the following two ways:

■

Go to the digital sender and look at the upper-left corner of the touchscreen. The IP address
should appear next to the word Ready.

■

If the IP address does not appear on the touchscreen, press the 

M

ENU

 button on the control

panel. Touch the INFORMATION menu, and then touch SHOW CONFIGURATION. The digital-
sender configuration information appears on the touchscreen. Touch the NEXT button to see the
Jetdirect data. Scroll through the information until you find the IP address.

You can gain access to the embedded Web server from any operating system that

supports the TCP/IP protocol and a Web browser, preferably either Netscape Navigator 4.7x
or Microsoft Internet Explorer 5.0x or later. You cannot view the embedded Web server pages
from outside a firewall.

Open a Web browser and type the digital sender IP address into the Address box to open the
EWS Web page.

Click Configuration Page to view the configuration page information or Device Information to
see the device name and the IP address for the device.

Scroll to view the information page that you want to see.

The following configuration information appears on the control panel or the EWS page.

Product Name: hp 9200c Digital Sender

Device Name: hp 9200c Digital Sender

Model Number: XXXXXX

Viewing the digital sender information pages

23