HP digital sender 9200c Manuale Di Servizio

Print the target on any HP LaserJet printer or another available, laser-quality printer.

Verify that the page size in the software program is set to legal, and do not make any
adjustments to the image size.

Ignore any printer errors that might appear about using incorrect paper size.

By selecting legal as the page size and printing on letter or A4 paper, the file prints to
the edge of the paper.

Place letter or A4 paper in tray 1 (or the multipurpose tray) and adjust the side guides.

Print the first pass of the calibration target. (First copy of the file.)

Return the first pass of the calibration target to tray 1 so that the arrows are facing into the
printer.

Print the second pass (second copy of the file). The final calibration target must look like the
following figure.

  Scanner calibration target

If the calibration target does not look like the figure shown here, the

calibration process will fail and the quality of the digital-sender scans will be
degraded. Where shown, the black areas must extend completely to the edges of the
page. If they do not, use a black marker to extend the black areas to the edges of the
page. If you have problems printing the calibration target, try using a different printer.

Use the following procedure to calibrate the scanner:

Take the calibration target to the digital sender.

Place it into the scanner ADF face-up and adjust the side guides.

Press the 

M

ENU

 button, touch DIAGNOSTICS on the control-panel screen, and then touch

CALIBRATE SCANNER.

After the calibration target has passed through the ADF once, reposition it in the ADF face down.

After completing the second pass, position the target on the scanner glass and initiate the final
pass.

36

4 Maintenance