HP digital sender 9200c Manuale Di Servizio
To change an IP address by using HP Web Jetadmin
Open HP Web Jetadmin. Type the TCP/IP address in the Quick Device Search field and click Go.
At the top menu bar, follow this procedure for discovery options.
At the top menu bar, follow this procedure for discovery options.
1
In the drop-down menu, click Devices.
2
In the drop-down menu, click New Devices. Click Go.
3
Click the column header of your choice (such as IP Address or Device Model) to arrange the list
of available devices in ascending or descending order.
of available devices in ascending or descending order.
4
Highlight the product that you want to configure, and click Open Device.
5
From the submenu at the top of the HP Web Jetadmin screen, select Configuration.
6
Click the network link located on the left side of the configuration screen.
7
Type the new IP information. You might need to scroll down for more options.
8
Click Apply to save the settings.
9
Click the Refresh button located next to the question mark on the right side of the screen.
10
Verify the IP information by clicking Status Diagnostics or by viewing the configuration page.
To change an IP address by using the embedded Web server
The digital sender has an embedded Web server that can be used to modify the TCP/IP parameters.
To use the embedded Web server, the IP address for the HP Jetdirect Inside print server must
already be configured. On a network, this is done automatically during initial product installation.
To use the embedded Web server, the IP address for the HP Jetdirect Inside print server must
already be configured. On a network, this is done automatically during initial product installation.
1
In a supported Web browser, type the current IP address of the device as the URL. The Device
Status page of the embedded Web server appears.
Status page of the embedded Web server appears.
2
Click Networking. On this page, you can modify the digital sender network configuration.
48
4 Maintenance