HP dv2500 Manuale Utente

Only authorized technicians trained by HP must repair this equipment. All troubleshooting

and repair procedures are detailed to allow repair at only the subassembly or module level. Because of
the complexity of the individual boards and subassemblies, do not attempt to make repairs at the
component level or modify any printed wiring board. Improper repairs can create a safety hazard. Any
indication of component replacement or printed wiring board modification may void any warranty or
exchange allowances.

The Setup Utility is a ROM-based information and customization utility that can be used even when your
Windows® operating system is not working or will not load.

The fingerprint reader (select models only) does not work when accessing the Setup Utility.

The utility reports information about the computer and provides settings for startup, security, and other
preferences.

To start the Setup Utility:

Turn on or restart the computer.

Before Windows opens and while “Press <F10> to enter setup” is displayed in the lower-left corner
of the screen, press 

f10

.

The following procedure explains how to change the language of the Setup Utility. If the Setup Utility is
not already running, begin at step 1. If the Setup Utility is already running, begin at step 2.

To start the Setup Utility, turn on or restart the computer, and then press 

f10

 while “Press <f10> to

enter setup” is displayed in the lower-left corner of the screen.

Use the arrow keys to select System Configuration > Language, and then press 

enter

.

Press 

f5

 or 

f6

 (or use the arrow keys) to select a language, and then press 

enter

 to select a language.

When a confirmation prompt with your preference selected is displayed, press 

enter

 to save your

preference.

To set your preferences and exit the Setup Utility, press 

f10

 and then follow the instructions on the

screen.

Your preferences go into effect when the computer restarts in Windows.

92

Chapter 5   Setup Utility