HP ipaq hw6500 Manuale Utente

Managing the Battery

NOTE:  HP recommends that you power off your HP iPAQ while using the 

USB charging feature. If your HP iPAQ is powered on, your device will 

consume more current than is being supplied by the USB charging and 

the main battery will not be charged. During this state, the charging LED 

will not light since it is not charging.

To enable USB charging:
1.

From the Start menu, tap Settings > System tab > Power icon 

> USB Charging tab. 

2.

Select Use USB Charging.

For faster charging, turn off all wireless activity and place your HP iPAQ 

in standby mode by turning the unit off.

NOTE:  The LED charging indicator does not light when the HP iPAQ is 

turned on and being charged with a USB connection.

Changing the Backlight Settings

To change the backlight settings in order to conserve more battery power:
1.

From the Start menu, tap Settings > System tab > Backlight.

2.

Select the following backlight tabs to change the settings:
• Battery  Power
• AC  Power
• Brightness

• Set the backlight to go off quickly after you stop using your 

HP iPAQ, or move the slide bar to Power Save mode to turn 

off the backlight completely. You can also set the backlight to 

turn on when a button is pressed or when the screen is tapped.

• Turn off all wireless connections and Bluetooth when they are 

not being used.