HP g6 Manuale Utente

The hard drive spare part kit includes a hard drive bracket and hard drive connector. The

hard drive bracket and hard drive connector, as well as the hard drive bracket screws, are also
available in the Hard Drive Hardware Kit.

Supports the following 9.50 mm, 6.35 cm (2.50 in) SATA hard drives:

750 GB, 5400 rpm

644351-001

640 GB, 5400 rpm

603785–001

500 GB, 7200 rpm

644685-001

320 GB, 5400 rpm

645086

Supports the following 7.00 mm, 6.35 cm (2.50 in) SATA hard drives:

320 GB, 7200 rpm

645089-001

250 GB, 7200 rpm

645091-001

Hard Drive Hardware Kit (not illustrated, includes connector, bracket, and screws)

639444-001

Before removing the hard drive, remove the following components:

Battery (see 

)

Service access cover (see 

Remove the hard drive:

Disconnect the hard drive adapter cable from the system board (1) and then pull up on the Mylar
tab (2) to remove the drive from the hard drive bay.

If the rubber hard drive bracket is wedged into the hard drive bay snugly, you may need

to gently pry up the hard drive using a thin nonconductive tool.

46

Chapter 4   Removal and replacement procedures

ENWW