HP ipaq h6300 Manuale Utente

Use the Self-Test application to run tests on the operation of your 
device. The diagnostics application tests for sound, screen 
calibration, screen patterns, read/write files, IR transfer, LED 
notification, buttons, Wi-Fi, and GSM/GPRS. 

To run the Self-Test application:

1. From the Start menu, tap Settings > System tab > Self-Test.

2. Place a check in the checkbox next to the items to be tested or 

in all checkboxes to test all of them.

3. Tap Next.

4. The Reset screen then prompts you to perform a reset before 

the tests begin. Leave the checkbox checked and tap Start to 
reset the device and start the tests. If you uncheck the box and 
tap Start, Reset will be skipped.

5. Follow the screen instructions as tests are performed on each 

requested item. Tap OK or Cancel as required as you 
proceed through the testing. If you cancel a test, the test 
status is set to FAIL.

 You will receive Error messages with specific information 

on items that fail. For instance, if you checked Wi-Fi and it is not 
working properly, you could get an Error message that says 
something like the following: “Error detecting Wireless Fidelity.” 
Use the information in the Error messages to correct the device 
item.