HP ipaq h6300 Manuale Utente

After you’ve connected the keyboard to your iPAQ Pocket PC, if 
you press a key on the keyboard and the letter does not register, 
perform the following steps to check your keyboard connection:

1. Be sure the Thumb Keyboard is securely connected to your 

iPAQ Pocket PC.

2. If the connection is secure, go to Start > Settings > System 

tab > iPAQ Keyboard and be sure the Enable Keyboard 
check box is checked.

3. Insert your cursor in the Test here box and tap the keyboard 

to see if it types characters in the box.

4. If characters appear in the Test here box, tap OK.

5. Use your stylus to press the Reset button on the left side of 

your iPAQ Pocket PC.

To disconnect the keyboard from your iPAQ Pocket PC, push in 
the two buttons on the side of the keyboard to release it, then pull 
the Pocket PC from the keyboard.

You can configure several features on your Thumb Keyboard. To 
customize your keyboard:

1. On your Pocket PC, select Start > Settings > System tab > 

2. Select the Setting tab.

3. Do one or more of the following:

❏

Tap the Enable Keyboard check box to enable or 
disable the keyboard functionality.

❏

Tap the Enable Sound check box to hear a click every 
time you press a key.