HP laserjet 3390, 3392 all-in-one Manuale Di Servizio

For Mac OS X V10.3 and Mac OS X V10.4, use Print Center to print.

For Macintosh computers, HP ToolboxFX is not supported.

HP Director is a software program for working with documents. When the document is loaded into the
ADF and the computer is connected directly to the all-in-one, HP Director appears on the computer
screen to initiate faxing, scanning, or changing settings on the all-in-one through Macintosh Configure
Device.

Also included is the HP all-in-one Setup Assistant, which sets up the fax and print queues.

Macintosh Configure Device is a Web-based program that provides access to information about the all-
in-one (or example, information about supplies status and all-in-one settings). Use Macintosh Configure
Device to monitor and manage the all-in-one from the computer.

You must perform a complete software installation to use Macintosh Configure Device.

●

Check the all-in-one status and print information pages.

●

Check and change all-in-one settings.

●

Check default print settings.

●

Check and change fax settings, including IP configuration, Advanced, mDNS, SNMP, network
configuration, and fax reports.

You can view Macintosh Configure Device when the all-in-one is directly connected to a computer or
when it is connected to the network.

You do not have to have Internet access to open and use Macintosh Configure Device.

Open HP Director by clicking the HP Director icon in the dock.

In HP Director, click Settings.

Select Configure Device to open the Macintosh Configure Device home page in a browser.

Open one of the following browsers:

●

Internet Explorer 5.0 or later

●

Netscape Navigator 4.75 or later

14

Chapter 1   Product information

ENWW