HP laserjet 3390, 3392 all-in-one Manuale Di Servizio
Media that can damage the all-in-one
In rare circumstances media can damage the all-in-one. Avoid the following types of media to prevent
possible damage:
possible damage:
●
Do not use media with staples attached.
●
Do not use transparencies designed for inkjet printers or other low-temperature printers. Use only
transparencies that are specified for use with HP LaserJet printers.
transparencies that are specified for use with HP LaserJet printers.
●
Do not use photo paper intended for inkjet printers.
●
Do not use paper that is embossed or coated and is not designed for the temperature of the image-
fuser. Select media that can tolerate temperatures of 200°C (392°F) for 0.1 second.
HP manufactures a media that is designed for the all-in-one.
fuser. Select media that can tolerate temperatures of 200°C (392°F) for 0.1 second.
HP manufactures a media that is designed for the all-in-one.
●
Do not use letterhead paper that was produced with low-temperature dyes or thermography.
Preprinted forms or letterhead must use inks that can tolerate temperatures of 200°C (392°F) for
0.1 second.
Preprinted forms or letterhead must use inks that can tolerate temperatures of 200°C (392°F) for
0.1 second.
●
Do not use any media that produces emissions, or that melts, offsets, or discolors when exposed
to 200°C (392°F) for 0.1 second.
to 200°C (392°F) for 0.1 second.
To order HP LaserJet printing supplies, go to
in the U.S. or to
worldwide.
ENWW
Media specifications
19