HP laserjet 3390, 3392 all-in-one Manuale Di Servizio
5.
Remove the pickup roller.
Figure 3-13
Replace the tray 2 pickup roller (4 of 7)
6.
Insert the left side of the replacement-pickup-roller shaft into the left slot (callout 1), and insert the
right side shaft (the side with the notch) into the right slot (callout 2).
right side shaft (the side with the notch) into the right slot (callout 2).
Figure 3-14
Replace the tray 2 pickup roller (5 of 7)
7.
Rotate the roller shaft until the notch engages with the drive shaft and clicks into place.
46
Chapter 3 Maintenance
ENWW