HP laserjet 3390, 3392 all-in-one Manuale Di Servizio

Use the HP ToolboxFX paper-handling options to configure your default settings. These are the same
options that are available on the Paper Handling and Printing menus on the control panel.

You must set the asset number. The asset number is not set at the factory. This number is stored in the
all-in-one for identification purposes.

Three options are available for handling print jobs when the all-in-one is out of media:

●

Select Wait for paper to be loaded.

●

Select Cancel from the Paper out action drop-down list to cancel the print job.

●

Select Override from the Paper out time drop-down list to send the print job to another paper tray.

The Paper out time field specifies how long the all-in-one waits before acting on your selections. You
can specify from 0 to 3600 seconds.

You must click Apply before changes take effect.

Use the HP ToolboxFX print-quality options to improve the appearance of your print jobs. These are the
same options that are available on the Print Quality menu on the control panel.

The four options provided for controlling print quality are resolution, REt (Resolution Enhancement
technology), print density, and Economode.

●

Resolution. Select 600 resolution for average print jobs and Fast Res 1200 for higher-quality print
jobs. Select ProRes 1200 for the highest-quality print job, but a longer printing time.

●

REt. You can turn on REt, which HP provides for improved print quality.

●

Print density. For increased print density, select a higher number. For decreased print density,
select a lower number.

●

Economode. Turn Economode on when you are printing average print jobs. Economode reduces
print quality, but increases the life of your print cartridge. To increase print quality, turn Economode
off. HP does not recommend full-time use of Economode.

You must click Apply before changes take effect.

Use these HP ToolboxFX paper-types options to configure print modes that correspond to the various
media types. When you select Restore Modes, all of the modes are reset to the factory settings.

You must click Apply before changes take effect.

ENWW

Using the HP ToolboxFX

75