HP laserjet 2015 series Manuale Di Servizio

This chapter documents removal and replacement of field replaceable units (FRUs) only.

Replace parts in the reverse order of their removal. Directions for difficult or critical replacement
procedures are included.

The sheet-metal edges of the product can be sharp. Use caution when working

on the product.

Note the length, diameter, color, type, and location of each screw. Be sure to return

each screw to its original location during reassembly.

Incorrectly routed or loose wire harnesses can interfere with other internal components and
can become damaged or broken. Frayed or pinched harness wires can be difficult to locate.
When replacing wire harnesses, always use the provided wire loops, lance points, or wire-
harness guides.

The product contains parts that are sensitive to electrostatic discharge (ESD).

Always service the product at an ESD-protected workstation, or use an ESD mat.

Watch for the ESD symbol to identify the parts that are sensitive to ESD. Protect these parts by using
an ESD wrist strap and by placing ESD-sensitive parts into protective ESD pouches.

The following tools are needed to service this product:

ł

#2 Phillips screwdriver with magnetic tip

ł

Small flat-blade screwdriver

ł

Small needle-nose pliers

ł

ESD mat

ł

Penlight

A pozidrive screwdriver can damage the screw heads on the product. Use a #2

Phillips screwdriver.

If you use a multispeed screwdriver, use a torque limiter.

84

Chapter 6   Removal and replacement

ENWW