HP lj 1100se Manuale Utente
EN
LJ 3100/3150 Service mode functions
101
2
Modem 1 dial tone
detect
detect
1
Make sure that the telephone cable is
plugged into the correct connector on the
product and that the telephone line is
operational (use a telephone to test the
line).
plugged into the correct connector on the
product and that the telephone line is
operational (use a telephone to test the
line).
2
If the test fails again, check the
configuration settings in the control panel.
configuration settings in the control panel.
3
If the test fails again, replace the LIU.
Scanner test #1
This test fails under normal conditions if the
document scanner is busy. If the document
scanner is not busy:
document scanner is busy. If the document
scanner is not busy:
1
Cycle power by unplugging the power cord
from the power source, waiting 10 seconds,
and then reconnecting the power cord.
from the power source, waiting 10 seconds,
and then reconnecting the power cord.
2
If the test fails again, clear all memory (see
“Extended Service menu tree” on page 99).
“Extended Service menu tree” on page 99).
3
If the test fails again, replace the formatter.
Extended Service mode self-test failures (continued)
Test
If the test fails, take these actions: