HP ml350 Manuale Utente

 

Removal and replacement procedures  30 

Tower foot 

To remove the component: 

1. 

Power down the server (on page 

2. 

Remove the tower bezel ("

3. 

Place the server on its side. 

4. 

Remove the foot. 

 

To replace the component, reverse the removal procedure. 

 

Access panel 

  

 

CAUTION:

  Do not operate the server with the access panel removed. Operating the server in 

this manner results in improper airflow and improper cooling that can lead to thermal damage.

  

To remove the component: 

1. 

Power down the server (on page 

2. 

Do one of the following: 

o 

Extend the server from the rack (on page 

o 

Remove the tower front bezel. ("

3. 

If the locking latch is locked, use a T-15 Torx screwdriver to unlock the latch. 

4. 

Slide the access panel back about 1.5 cm (0.5 in). 

5. 

Lift and remove the access panel. 
Turn the access panel over to locate labeling with information about options installation, LEDs, and 
switch settings. 

To replace the component, reverse the removal procedure.