HP ml350 Manuale Utente
Removal and replacement procedures 42
PCI-X expansion cage
CAUTION:
To prevent damage to the server or expansion boards, power down the server and
remove all AC power cords before removing or installing the PCI expansion cage.
To remove the component:
1.
Power down the server.
2.
Do one of the following:
o
Unlock and remove the bezel ("
o
Extend the server from the rack (on page
3.
Remove the access panel.
4.
Remove the rack bezel (rack servers only) ("
5.
Remove the four T-15 screws from the hard drive cage, and then slide the hard drive cage partially
out of the chassis.
out of the chassis.
6.
Disconnect any external cables from the PCI-X expansion boards.
7.
Disconnect the power cable extension and the signal cable from the PCI-X expansion cage.