Manualsbrain.com
  1. Manuali
  2. Marche
  3. HP
  4. ml350
  5. Manuale Utente

HP ml350 Manuale Utente

Scarica
Pagina di 91
 
Removal and replacement procedures  46 
o 
Full-height 
 
To replace the component, reverse the removal procedure. 
  
 
IMPORTANT:
  Be sure to connect the right-angle end of the SATA data cable to the system 
board. Connecting it to the SATA drive may interfere with other installed media bay devices. 
  
  
 
IMPORTANT:
  If both SATA and PATA optical devices are installed simultaneously, only one 
can boot at a time. Boot priority will go to SATA if media is inserted into the SATA optical 
drive. Boot priority for PATA is not configurable. To boot PATA, remove the media from the 
SATA optical device, or remove the SATA optical device. 
  
 
Heatsink 
To remove the component: 
1. 
Power down the server (on page 
2. 
Do one of the following: 
o 
o 
Extend the server from the rack (on page 
3. 
Remove the access panel. 
4. 
Disconnect the heatsink fan cable from the system board. 
5. 
Open the heatsink locking levers.