HP ml350 Manuale Utente
Specifications 84
Specification Value
Drive rotation
300 rpm
Transfer rate
High 500
Kb/s
Low 250
Kb/s
Bytes/sector 512
Sectors per track (high/low)
Sectors per track (high/low)
18/9
Tracks per side (high/low)
80/80
Access times
Track-to-track (high/low)
3 ms/6 ms
Average (high/low)
169 ms/94 ms
Setting time
15 ms
Latency average
100 ms
Cylinders (high/low)
80/80
Read/write heads
2
FBDIMM specifications
CAUTION:
Be sure to install FBDIMMs in the proper configuration. Refer to the Documentation
CD.
Item
Description
Type
Registered DDR2 Fully Buffered DIMMs (FBDIMMs)
Size
512-MB, 1-GB, 2-GB, 4-GB
Width 72
bits
Upgrade requirement * FBDIMMs must be installed in pairs within a bank, except in single-FBDIMM
mode, which supports a single 512-MB FBDIMM installed in slot 1A. A bank must
be populated with two FBDIMMs with identical HP part numbers.
*Use only Registered DDR2 FBDIMMs. Use HP FBDIMMs only.
CD-ROM drive specifications
Specification Value
Disk formats
CD-ROM (modes 1 and 2); mixed mode (audio and data combined); CD-DA;
Photo CD (single/multiple-session), CD-XA ready; CDi ready
Photo CD (single/multiple-session), CD-XA ready; CDi ready
Capacity
550 MB (mode 1, 12 cm)
640 MB (mode 2, 12 cm)
Block size
2368, 2352 bytes (mode 0)
2352, 2340, 2336, 2048 bytes (mode 1)
2352, 2340, 2336, 2048 bytes (mode 2)
Dimensions