HP ml310 Manuale Utente
Server component identification
15
NOTE: The system management driver must be installed in order
for the internal health LED to provide pre-failure and warranty
conditions.
conditions.
The front panel health LEDs indicate only the current hardware status. In some
situations, HP SIM ("Array Diagnostic Utility" on page
situations, HP SIM ("Array Diagnostic Utility" on page
LEDs because the software tracks more system attributes.
System LED and
color
color
Internal health
LED color
LED color
Status
Processor failure,
socket X (Amber)
socket X (Amber)
Red
One or more of the following conditions may exist:
•
Processor in socket X has failed.
•
Processor X is not installed in the socket.
•
ROM detected a failed processor during POST.
Amber
Processor in socket X is in a pre-failure condition.
PPM failure, slot X
(Amber)
(Amber)
Red •
PPM in slot X has failed.
•
PPM is not installed in slot X, but the corresponding
processor is installed.
DIMM failure, slot X
(Amber)
(Amber)
Red •
DIMM in slot X has failed.
•
DIMM has experienced a multi-bit error.
Amber
•
DIMM in slot X has reached single-bit correctable
error threshold.
•
DIMM in slot X is in a pre-failure condition.
DIMM bank error (all
slots in one bank,
Amber)
slots in one bank,
Amber)
Red
The bank is not populated entirely or DIMMs do not all
match within the bank.
match within the bank.
DIMM failure (all
slots, Amber)
slots, Amber)
Red •
No valid or usable memory is installed in the system.
•
The banks are not populated in the correct order.
System temperature
alert (Amber)
alert (Amber)
Red
System temperature has exceeded OS cautionary level
or critical hardware level.
or critical hardware level.
Fan (Amber)
Red
A required fan has failed.