HP mini-note 2133 2140 Manuale Di Servizio

All display assembly spare part kits include 2 microphones, 2 speakers, and 2 WLAN antenna

transceivers and cables.

 

8.9-inch, WXGA display assembly for use only with computer models equipped with camera module 483384-001

8.9-inch, WXGA display assembly for use only with computer models not equipped with camera
module

482278-001

8.9-inch, WSVGA display assembly for use only with computer models equipped with camera
module and system boards with the following spare part numbers: 498308-001, 500754-001, and
500755-001

498309-001

8.9-inch, WSVGA display assembly for use only with computer models not equipped with camera
module and system boards with the following spare part numbers: 498308-001, 500754-001, and
500755-001

502600-001

 

10.1-inch, WXGA display assembly for use only with SD computer models equipped with camera
module

511743-001

10.1-inch, WXGA display assembly for use only with HD computer models equipped with camera
module

511744-001

Before removing the display assembly, follow these steps:

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.

Disconnect all external devices connected to the computer.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.

Remove the battery (see 

Remove the following components:

Keyboard (see 

)

Hard drive or solid-state drive (see 

)

Top cover (see 

Audio board (see 

System board (see 

)

Disconnect the wireless antenna cables from the WLAN module (see 

Component replacement procedures

71