HP mediasmart sl4782n Manuale Utente
7
Regulatory and Safety Information
WARNING: Text set off in this manner indicates
that failure to follow directions could result in
damage to equipment, loss of information, bodily
harm, or loss of life.
that failure to follow directions could result in
damage to equipment, loss of information, bodily
harm, or loss of life.
WARNING: To reduce the risk of electrical shock,
do not remove cover (or back).
do not remove cover (or back).
No user-serviceable parts inside.
Refer servicing to qualified service personnel.
This symbol is intended to alert the user to the
presence of uninsulated “Dangerous Voltages”
within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electrical
shock to persons. Refer servicing to qualified
service personnel.
presence of uninsulated “Dangerous Voltages”
within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electrical
shock to persons. Refer servicing to qualified
service personnel.
WARNING: To reduce the risk of fire or electrical
shock, do not expose this appliance to rain or
moisture.
shock, do not expose this appliance to rain or
moisture.
WARNING: Do not place this
product on an unstable cart,
stand, tripod, bracket, or
table. The product may fall,
causing serious personal
injury and serious damage to
the product. Use only with a
cart, stand, tripod, bracket, or table recommended
by the manufacturer or sold with the product.
Follow the manufacturer’s instructions when
installing the product and use mounting
accessories recommended by the manufacturer. A
product and cart combination should be moved
with care. Quick stops, excessive force, and
uneven surfaces may cause the product and cart
combination to overturn.
product on an unstable cart,
stand, tripod, bracket, or
table. The product may fall,
causing serious personal
injury and serious damage to
the product. Use only with a
cart, stand, tripod, bracket, or table recommended
by the manufacturer or sold with the product.
Follow the manufacturer’s instructions when
installing the product and use mounting
accessories recommended by the manufacturer. A
product and cart combination should be moved
with care. Quick stops, excessive force, and
uneven surfaces may cause the product and cart
combination to overturn.
Federal Communication
Commission Interface
Statement
Commission Interface
Statement
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of
the following measures:
is encouraged to try to correct the interference by one or more of
the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician
for help.
for help.
Closed caption notice
This television receiver provides display of television closed
captioning in accordance with § 15.119 of the FCC Rules.
captioning in accordance with § 15.119 of the FCC Rules.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set
forth for an uncontrolled environment. This equipment should be
installed and operated with a minimum distance of 20 cm
between the radiator and your body.
forth for an uncontrolled environment. This equipment should be
installed and operated with a minimum distance of 20 cm
between the radiator and your body.
This transmitter must not be co-located or operating in conjunction
with any other antenna or transmitter.
with any other antenna or transmitter.
Operations in the 5.15–5.25GHz band are restricted to indoor
usage only. IEEE 802.11b or 802.11g operation of this product
in the U.S.A. is firmware-limited to channels 1 through 11.
usage only. IEEE 802.11b or 802.11g operation of this product
in the U.S.A. is firmware-limited to channels 1 through 11.
Modifications
Caution: Pursuant to 47CFR15.21 of the FCC Rules, any
changes or modifications to this equipment not expressly
approved by the Hewlett-Packard Company may cause harmful
interference and void the FCC authorization to operate this
equipment.
changes or modifications to this equipment not expressly
approved by the Hewlett-Packard Company may cause harmful
interference and void the FCC authorization to operate this
equipment.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
Industry of Canada Radio Statement
This device has been designed to operate with the antennas listed
below, and having a maximum gain of 5.1 dB. Antennas not
included in this list or having a gain greater than 5.1 dB are
strictly prohibited for use with this device. The required antenna
impedance is 50 ohms.
below, and having a maximum gain of 5.1 dB. Antennas not
included in this list or having a gain greater than 5.1 dB are
strictly prohibited for use with this device. The required antenna
impedance is 50 ohms.
Wireless LAN Antennas (internal to the TV):
SL4282N: Wistron NeWeb Corp. 50.3YJ09.001
SL4782N: Wistron NeWeb Corp. 50.3YK05.001
•
•
•
•
•
•
•
•
•