HP nc3120 Manuale Utente

 

 

WARNING:  Only authorized technicians trained by Compaq should attempt to repair this 
equipment. All troubleshooting and repair procedures are detailed to allow only 
subassembly/module level repair. Because of the complexity of the individual boards and 
subassemblies, no one should attempt to make repairs at the component level or to make 
modifications to any printed wiring board. Improper repairs can create a safety hazard. Any 
indications of component replacement or printed wiring board modifications may void any 
warranty. 

 

 

WARNING:  To reduce the risk of personal injury from electrical shock and hazardous energy 
levels, do not exceed the level of repair specified in these procedures. Because of the 
complexity of the individual boards and subassemblies, do not attempt to make repairs at the 
component level or to make modifications to any printed wiring board. Improper repairs could 
create conditions that are hazardous. 

 

 

WARNING:  To reduce the risk of electric shock or damage to the equipment: 

■  If the system has multiple power supplies, disconnect power from the system by 

unplugging all power cords from the power supplies. 

■  Do not disable the power cord grounding plug. The grounding plug is an important safety 

feature. 

■  Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at 

all times. 

 

 

CAUTION:  To properly ventilate your system, you must provide at least 12 inches (30.5 cm) of 
clearance at the front and back of the computer. 

 

 

CAUTION:  The computer is designed to be electrically grounded. To ensure proper operation, 
plug the AC power cord into a properly grounded AC outlet only. 

For additional information, refer to the README files in the \DIAGS directory on the Compaq 
Software and Documentation CD.  To view these files, insert the Software and Documentation 
CD, switch to the \DIAGS directory on that drive, and enter: 

SETUP /README