HP omnibook xt1000 Manuale Di Servizio

2-14 

Removal and Replacement 

HP Pavilion zt1100/xz100 Omnibook xt1000 

•  Carefully press the SDRAM module into the connector at an angle of about 30°, until it is fully 

inserted. Then press down on both sides of the module until the latches snap closed. 

 

1.  Unplug the AC adapter, if present, and remove the battery. 

2.  Remove the keyboard cover (page 2-9). 

3.  Open the keyboard (page 2-11, steps 1 though 4). You don’t need to disconnect the keyboard cable. 

4. Press outward to release the latches at the sides of the SDRAM module (so that the free edge of the 

module pops up), then pull the module out of the connector. 

 

 

•  Carefully press the SDRAM module into the connector at an angle of about 30°, until it is fully 

inserted. Then press down on both sides of the module until the latches snap closed.