HP omnibook xt1000 Manuale Di Servizio

2-18 

Removal and Replacement 

HP Pavilion zt1100/xz100 Omnibook xt1000 

(HP Authorized Service Providers Only)

•  #0 Phillips screwdriver. 

1.  Unplug the AC adapter, if present, and remove the battery.  

2.  Remove the keyboard cover (page 2-9). 

3.  Remove both retaining screws from the bottom of the notebook. 

 

 

 

 

4. Open the display so that it lays flat. 

5.  Remove the screw from the left speaker, and move the speaker to the side. Be careful not to pull on 

the wires connecting the speaker to the motherboard.  

6.  Disconnect the display cable and ground wire from the motherboard, and carefully remove the 

cable from the retaining clip near the left display hinge. 

7.  If present, disconnect the wireless cables near the right display hinge. 

8.  Remove the retaining screws from the lugs just below the display hinges. 

9.  Lift the display off of the notebook. 

Screws, 
M2.5x6mm (2)