HP officejet d Manuale Utente

work with printheads and ink cartridges

45

hp officejet d series

Make sure you have the following materials available:

•

A clean, lint-free cloth

•

Distilled, filtered, or bottled water (do not use tap water, as it may 
contain contaminants that can damage the printheads)

Caution! Be careful not to get ink on your hands or clothing.

1

Turn the unit on and open the print-carriage access door.
The print carriage moves to the center.

2

After the print carriage has moved to the center, unplug the power 
cord from the back of the unit.

3

Press the gray button to release the ink cartridge, then pull it up and 
out of its slot.

4

Inspect the ink cartridge contacts and the contacts inside the ink 
cartridge socket for ink and debris buildup. 

5

Clean any visible ink deposits with a clean, soft, lint-free cloth.
If necessary, moisten the cloth with one drop of water.

6

Place the ink cartridge back into the holder.

7

Repeat if necessary for the other ink cartridge.

8

Close the door and plug in the unit.
Because you removed an ink cartridge from its holder, the HP OfficeJet 
needs to align the printheads.

9

After the message appears in the front-panel display, press Enter to 
align the printheads.
A page is printed to confirm alignment.

Warning! It is very important that you disconnect the 
printer from its electrical power source before touching 
the ink cartridge contacts. Electrical shock or severe 
damage to the printer can occur if you touch the contacts 
while there is electrical power to the printer. Do not use 
the On button to turn the printer off.