HP omnibook 2000_5500_5700 Manuale Di Servizio

82

CPU Module
(HP Authorized Service Providers Only)

The following table lists the various CPU modules for the OmniBook 2000, 5500, and 5700.

100C

F1320-60901

F1320-69001

120C

F1320-60902

F1320-69002

133C

F1320-60903

F1320-69003

150C (MMX)

F1350-60904

F1350-69004

166C (MMX)

F1350-60905

F1350-69005

P54C-133

F1371-60908

F1371-69008

P55C-133 (MMX)

F1371-60909

F1371-69009

• 

Small phillips screwdriver

Removal Procedure
1. Exit all applications, including Windows.
2. Turn the OmniBook off and remove the battery and ac adapter.
3. Follow the Display Removal Procedure on page 71 and the Keyboard Removal Procedure

on page 74 to remove these components.

4. Remove the Upper Chassis Case Screw and disconnect the On/Suspend Button and

Microphone Cables.  Lift the Upper Chassis Case from the base of the unit.  See Figure 35
on page 80.

5a. For the OmniBook 2000 and 5700, follow these steps:

1) Remove the two CPU Screws (see Figure 37 on page 83 for the location of the screws)

and disconnect the CPU Fan Cable.

2) Gently rock the CPU Module back and forth to remove.
3) Remove the two CPU Fan Screws and the CPU Fan (see Figure 37 for the location of

the screws).

5b. For the OmniBook 5500, follow these steps:

1) Remove the two Heat Spreader Screws and lift away the Heat Spreader.  Refer to

Figure 38 on page 84.

2) Remove the one Heat Pipe Bracket Screw and lift away the Heat Bracket.
3) Very carefully lift the Heat Pipe from the Keyboard Shielding Plate.  Do not bend the

4) Remove the two Heat Sink Screws and the four CPU Screws.  Gently rock the CPU

back and forth to remove.