HP pavilion dv6500 6600 6700 Manuale Di Servizio

Rubber Kit (includes base enclosure rubber feet and display bezel screw covers)

431430-001

The computer feet are adhesive-backed rubber pads. The feet attach to the base enclosure in the locations

illustrated below.

2048-MB (PC2-5300, 667-MHz, DDR2)

453774-001 and

457437–001

1024-MB (PC2-5300, 667-MHz, DDR2)

446495-001

512-MB (PC2-5300, 667-MHz, DDR2)

446494-001

Before removing the memory module, follow these steps:

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

Disconnect all external devices connected to the computer.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet and

then unplugging the AC adapter from the computer.

Remove the battery (see 

Remove the memory module:

Position the computer with the front toward you.

Loosen the two Phillips PM2.0×5.0 screws (1) that secure the memory/WLAN module compartment

cover to the computer.

Component replacement procedures 53