APart MA35 Dépliant

Pagina di 1
APart MA35
MIXING AMPLIFIER
TECHNICAL SPECIFICATIONS
The Apart MA35 is probably the most complete and compact 35 watt 100 Volt mixing  
desktop amplifier. The amplifier has 4 inputs: 2 MIC, 1 MIC-LINE and 1LINE. The 
microphone inputs can have phantom power via an internal jumper. 
A two step priority system is standard: MIC1 can have voice activated priority (VOX) that 
mutes all other inputs. This VOX mute can be switched off via an internal jumper. The 
contact closure (via DIN5 on MIC1 or Euroblock on MIC1-2) will activate the chime  and 
will mute input 3 (MIC3/LINE3) and 4.
The pre-amp out, power-amp input allows you to insert extra signal processors or to link the 
signal to other power amplifiers.
Further the MA35 is equipped with a bass - treble tone control, a record output and limiter 
circuit on the output to avoid clipping.
MA35 can operate with a 12V and 230V power supply. The amplifier has been build into a 
compact and sturdy metal housing. A 19” mounting bracket (Ref: MA35-19) is available as 
an option for rack mounting.
In brief, MA35 has all the features a contractor needs!
WWW.APART-AUDIO.COM
INFO@APART-AUDIO.COM
Input
MIC1 (Front / Rear)
MIC2 
MIC3/LINE3
LINE4
Power amp in
Output Power RMS
Rated
Music - Program
Speaker outputs
Pre amp out
Record out
Chime
Priority system
Limiter
Frequency Range
S/N Ratio
Distortion
Power supply
Dimensions (H x W x D)
Weight
Bal. Jack / Bal XLR - DIN5 (1mV)
Bal. Jack - XLR (1mV) 
Bal. Jack - XLR (1mV) / RCA Cinch (300 mV)
RCA Cinch (300 mV)
RCA Cinch (1V)
35 watt
40 watt
8 Ohm, 70 - 100 Volt (Euroblock)
RCA Cinch (1V)
RCA Cinch (350 mV)
Yes (ding-dong) via contact closure (Euroblock)
2-step priority mute system (VOX / contact closure)
Dynamic-slow @ -3 dB, defeatable via internal jumper.
60 Hz - 18 kHz
-67dB (mic open), -77dB (all at zero)
< 0.5%
12V DC (Euroblock)- 230V AC
88 x 272 x 286 mm 
5 Kg