HP pavilion f2304 Manuale Utente

The monitor power supply is provided with Automatic Line 
Switching (ALS). This feature allows the monitor to operate 
on input voltages between 100-120V  or 200-240V .

The power cord set (flexible cord or wall plug) received with 
the monitor meets the requirements for use in the country 
where you purchased the equipment.

If you need to obtain a power cord for a different country, 
you should purchase a power cord that is approved for use 
in that country.

The power cord must be rated for the product and for the 
voltage and current marked on the product’s electrical 
ratings label. The voltage and current rating of the cord 
should be greater than the voltage and current rating 
marked on the product. In addition, the cross-sectional area 
of the wire must be a minimum of 0.75 mm² or 18AWG, 
and the length of the cord must be between 6 feet (1.8 m) 
and 12 feet (3.6 m). If you have questions about the type of 
power cord to use, contact your HP authorized service 
provider.

A power cord should be routed so that it is not likely to be 
walked on or pinched by items placed upon it or against it. 
Particular attention should be paid to the plug, electrical 
outlet, and the point where the cord exits from the product.