HP pavilion ze1200_xf300 Manuale Di Servizio

26 

Troubleshooting and Diagnostics 

ze1000 Series Troubleshooting and Self-Repair Guide 

•  Don’t use the touch pad while the notebook is starting up or resuming from standby or 

hibernation. 

•  If the notebook still doesn’t respond, remove the battery and AC adapter, and remove any PC 

Card. Then reset the notebook using the reset switch on the bottom of the notebook, replace the 
battery and plug in the AC adapter, and turn on the notebook by pressing the power button. 

•  If the notebook still doesn’t respond, call HP for assistance. 

•  Make sure the battery is properly inserted and fully charged. Check the battery’s charge by 

clicking the power icon in the taskbar, or using Power Options in Control Panel. 

•  If available, try another battery. 

•  Make sure the optional USB floppy disk drive is connected correctly. 
•  Make sure the floppy disk is bootable. 
•  Make sure the floppy disk drive is selected as the boot device—see “Changing the Boot Device” 

on page 11. 

•  The notebook can take a minute or longer to resume if a network card is installed. A blinking 

cursor appears on the display while the system is loading and checking hardware and network 
connections. As soon as the hardware is reinitialized, the Windows desktop appears. 

•  Close all applications before going on standby or into hibernation. 
•  If the problems appeared after you installed new software (including drivers, such as printer 

drivers), uninstall the software. Contact the software application or device vendor for additional 
support.