HP photosmart 2700 Manuale Utente

The printer has the following lights and buttons on the control panel:

1

Left arrow button (

<

): Press this button to navigate through the menus or to decrease a value that appears on the display.

Press the left and right arrow buttons simultaneously to print a demo page.

2

OK button: Press the 

OK

 button for the following actions:

●

Open the control-panel menus.

●

Select a menu item.

●

Clear some printer errors.

●

Continue printing after reloading a tray.

●

Acknowledge that a non-HP supply is in use.

●

Return the printer to the Ready state whenever the ready light is blinking.

3

Right arrow button (

>

): Press this button to navigate through the menus or to increase a value that appears on the

display.

4

Display: The display provides information about the printer. Use the menus on the display to establish printer settings.
See 

5

Cancel Job button 

(X)

: Press this button to cancel a print job whenever the attention light is blinking. You can also press

this button to exit the control-panel menus.

6

Ready light (green): The ready light is on when the printer is ready to print. It blinks when the printer is receiving print
data.

7

Attention light (amber): The attention light blinks when a print cartridge is empty.

The attention light does not blink if more than one print cartridge is empty.

8

Print-cartridge-status gauges: These gauges show the consumption level for each print cartridge (black, yellow, cyan,
and magenta).

If the consumption level is unknown, a ? symbol appears. This can occur in the following circumstances:

●

The print cartridge is missing or installed incorrectly.

●

The print cartridge is defective.

●

The print cartridge might not be an HP cartridge.

18

Chapter 2   Control panel

ENWW