HP photosmart 2700 Manuale Utente
Service menu
Use this menu to restore default settings, clean the printer, and activate special modes that affect print
output.
output.
Menu item
Description
Restore defaults
Sets all customized settings to the factory default values.
Cleaning mode
Use this option to clean the printer if you see toner specks or other marks on the
printed output. The cleaning process removes dust and excess toner from the paper
path.
printed output. The cleaning process removes dust and excess toner from the paper
path.
When you select this item, the printer prompts you to load plain paper in tray 1 and
then press
then press
OK
to start the cleaning process. Wait until the process is complete.
Discard the page that prints.
USB speed
Sets the USB speed to high or full. For the printer to actually operate at high speed,
it must have high speed enabled and be connected to an EHCI host controller which
is also operating at high speed. This menu item also does not reflect the current
operating speed of the printer.
it must have high speed enabled and be connected to an EHCI host controller which
is also operating at high speed. This menu item also does not reflect the current
operating speed of the printer.
Less paper curl
If printed pages are consistently curled, use this option to set the printer to a mode
that reduces curl.
that reduces curl.
The default setting is Off.
Archive print
If you are printing pages that will be stored for a long time, use this option to set the
printer to a mode that reduces toner smearing and dusting.
printer to a mode that reduces toner smearing and dusting.
The default setting is Off.
ENWW
Using the control-panel menus
25