HP photosmart 2700 Manuale Utente

Carefully follow the guidelines in this section when replacing printer supplies.

To facilitate the replacement of supplies, keep the following guidelines in mind when setting up the
printer.

●

Sufficient space is required above and in the front of the printer for removing supplies.

●

The printer should be located on a flat, sturdy surface.

For instructions on installing supplies, see the installation guides provided with each supply item or go
to 

Hewlett-Packard recommends the use of HP products in this printer. Use of non-

HP products may cause problems requiring service that is not covered by the HP warranty or
service agreements.

When a print cartridge approaches the end of useful life, the control panel displays a message
recommending that you order a replacement. The printer can continue to print using the current print
cartridge until the control panel displays a message instructing you to replace the cartridge.

The printer uses four colors and has a different print cartridge for each color: black (K), cyan (C), magenta
(M), and yellow (Y).

Replace a print cartridge when Replace <color> cartridge appears on the control panel.

Open the front door.

Do not place anything on the transfer unit and do not touch the transfer unit,

which is located on the inside of the front door.

ENWW

Replacing supplies and parts

83