HP procurve 2500 Manuale Utente

    100

Configuring Secure Shell (SSH)

Messages Related to SSH Operation

00000K Peer unreachable.

Indicates an error in communicating with the tftp server or 
not finding the file to download. Causes include such factors 
as:
• Incorrect IP configuration on the switch
• Incorrect IP address in the command
• Case (upper/lower) error in the filename used in the 

command

• Incorrect configuration on the TFTP server
• The file is not in the expected location.
• Network misconfiguration
• No cable connection to the network

00000K Transport error.

Indicates the switch experienced a problem when 
trying to copy tftp the requested file. The file may not 
be in the expected directory, the filename may be 
misspelled in the command, or the file permissions 
may be wrong.

Cannot bind reserved TCP port 

<port-number>.

The ip ssh port command has attempted to configure a 
reserved TCP port. Use the default or select another port 
number. See “Note on Port Number” on page 91.

Client public key file corrupt or 

not found. Use 'copy tftp pub-key-

file <ip-addr> <filename>' to down-

load new file.

The client key does not exist in the switch. Use copy 
tftp to download the key from a TFTP server.

Download failed: overlength key in 
key file.

Download failed: too many keys in key 
file.

Download failed: one or more keys is 
not a valid RSA public key.

The public key file you are trying to download has one of the 
following problems:
• A key in the file is too long. The maximum key length is 

1024 characters, including spaces. This could also mean 
that two or more keys are merged together instead of 
being separated by a <CR><LF>.

• There are more than ten public keys in the key file.
• One or more keys in the file is corrupted or is not a valid 

rsa public key.

Error: Requested keyfile does not 

exist.

The client key does not exist in the switch. Use copy 
tftp to download the key from a TFTP server.