HP procurve 2500 Manuale Utente

115    

Enhancements in Release F.04.08
Configuring RADIUS Authentication and Accounting

This section assumes you have already:

■

Configured RADIUS authentication on the switch for one or more access methods

■

Configured one or more RADIUS servers to support the switch

If you have not already done so, refer to “General RADIUS Setup Procedure” on page 104 before 
continuing here.

RADIUS accounting  collects data about user activity and system events and sends it to a RADIUS 
server when specified events occur on the switch, such as a logoff or a reboot. The Series 2500 
switches support three types of accounting services:

■

 Provides records containing the information listed below on clients 

directly connected to the switch and operating under Port-Based Access Control (802.1X):

(For 802.1X information on the Series 2500 switches, refer to “Configuring Port-Based Access Control 
(802.1X)” on page 29.)

■

 Provides records containing the information listed below about login 

sessions (console, Telnet, and SSH) on the switch:

[no] aaa accounting update 
      periodic < 1 .. 525600 >  (in minutes)

[no] aaa accounting suppress null-username

page 121

show accounting

page 125

show accounting sessions

show radius accounting

page 125

• Acct-Session-Id
• Acct-Status-Type
• Acct-Terminate-Cause
• Acct-Authentic

• Acct-Delay-Time
• Acct-Input-Packets
• Acct-Output-Packets
• Acct-Input-Octets

• Nas-Port
• Acct-Output-Octets
• Acct-Session-Time
• User-Name

• Service-Type
• NAS-IP-Address
• NAS-Identifier
• Called-Station-Id

• Acct-Session-Id
• Acct-Status-Type
• Acct-Terminate-Cause
• Acct-Authentic

• Acct-Delay-Time
• Acct-Session-Time
• User-Name
• Service-Type

• NAS-IP-Address
• NAS-Identifier
• Calling-Station-Id