HP procurve 2500 Manuale Utente

Pagina di 270
    120
Enhancements in Release F.04.08
Configuring RADIUS Authentication and Accounting
Determine how you want the switch to send accounting data to a RADIUS server:
Start-Stop:
 
Send a start record accounting notice at the beginning of the accounting session and a 
stop record notice at the end of the session. Both notices include the latest data the 
switch has collected for the requested accounting type (Network, Exec, or System).
Do not wait for an acknowledgement.
The system option (page 119) ignores 
start-stop because the switch sends the accumulated data 
only when there is a reboot, reload, or accounting on/off event.
Stop-Only:
Send a stop record accounting notice at the end of the accounting session. The notice 
includes the latest data the switch has collected for the requested accounting type 
(Network, Exec, or System).
Do not wait for an acknowledgment.
The system option (page 119) always delivers 
stop-only operation because the switch sends the 
accumulated data only when there is a reboot, reload, or accounting on/off event.
Syntax:
[no] aaa accounting < exec | network | system > 
Configures RADIUS accounting type
< start-stop | stop-only > radius 
and how data will be sent to the RADIUS
server
.
For example, to configure RADIUS accounting on the switch with 
start-stop for exec functions and 
stop-only for system functions:
Figure 48.   Example of Configuring Accounting Types 
3. (Optional) Configure Session Blocking and Interim Updating Options
These optional parameters give you additional control over accounting data.
Configures exec and 
system accounting 
and controls.
Summarizes the 
switch’s accounting 
configuration.
Exec and System accounting are active. 
(Assumes the switch is configured to 
access a reachable RADIUS server.)