HP procurve 2500 Manuale Utente

127    

Enhancements in Release F.04.08
Configuring RADIUS Authentication and Accounting

Messages Related to RADIUS Operation

Can’t reach RADIUS server < x.x.x.x >.

A designated RADIUS server is not responding to an authen-
tication request. Try pinging the server to determine 
whether it is accessible to the switch. If the server is acces-
sible, then verify that the switch is using the correct encryp-
tion key and that the server is correctly configured to 
receive an authentication request from the switch.

No server(s)responding.

The switch is configured for and attempting RADIUS 
authentication, however it is not receiving a response from 
a RADIUS server. Ensure that the switch is configured to 
access at least one RADIUS server. (Use show radius.) If 
you also see the message Can’t reach RADIUS 
server < x.x.x.x >,

 try the suggestions listed for 

that message.

Not legal combination of authentication 
methods.

Indicates an attempt to configure local

as both the primary 

and secondary authentication methods. If local is the 
primary method, then none must be the secondary method.

Removes the "003" and "001" addresses from the 
RADIUS server list.

Inserts the "003" address in the first position in the 
RADIUS server list, and inserts the "001" address in 
the last position in the list.

Shows the new order in which the switch searches 

for a RADIUS server.