HP procurve 2500 Manuale Utente

    252

Release F.05.32 (Not a General Release)

■

 — After a new configuration is loaded from a TFTP server, 

the switch reboots so the new configuration will take effect.  If that same configuration is 
loaded from a TFTP server, the switch recognizes that the configuration is unchanged and 
the switch does not reboot.  Loading the same configuration repeatedly (without rebooting) 
causes a memory leak.

Release F.05.33

■

 — Copying a previously saved startup-configuration that has 

"stack join (mac address)" to a member switch of the IP stack breaks the membership of that 
same stack.  Stack commander reports member "mismatched".

■

 — Java files are JDK 1.1, which are not Win2k compliant.  (For this 

fix they were recompiled using JDK 1.2.)

Release F.05.34

■

 — When VLANs are created or added to the switch in non-

sequential order (based on VLAN ID), incrementing MAC addresses are assigned to each 
VLAN as it is added. These address assignments change on reboot of the switch.

■

 — The scroll bar does not display or respond correctly after 

resizing a window. 

Release F.05.35 

(Never Released)

Release F.05.36  

(Never Released)

■

— The switch may crash with a Bus error in mSnmpCtrl when 

adding a less-specific static route.

■

 — Under some circumstances a port may take approximately 30 

seconds to go into a Forwarding state.