HP procurve 2500 Manuale Utente

    66

Enhancements in Release F.05.05 through F.05.60

Show Commands for Port-Access Supplicant

For each port configured as a supplicant, 

cant statistics [e] < port-list >] displays the source MAC address and statistics for transactions with the 
authenticator device most recently detected on the port. If the link between the supplicant port and 
the authenticator device fails, the supplicant port continues to show data received from the connec-
tion to the most recent authenticator device until one of the following occurs:

■

The supplicant port detects a different authenticator device.

■

You use the 

aaa port-access supplicant [e] < port-list > clear-statistics command to clear the 

statistics for the supplicant port.

■

The switch reboots.

Thus, if the supplicant’s link to the authenticator fails, the supplicant retains the transaction statistics 
it most recently received until one of the above events occurs. Also, if you move a link with an 
authenticator from one supplicant port to another without clearing the statistics data from the first 
port, the authenticator’s MAC address will appear in the supplicant statistics for both ports.

show port-access supplicant [[e] < port-list >] [statistics]

show port-access supplicant [[e] < port-list >]

 secret parameter) for all ports or < port-

list > ports configured on the switch as supplicants. The 
Supplicant State can include the following:

Connecting - Starting authentication.
Authenticated - Authentication completed (regardless
of whether the attempt was successful)

.

 

Acquired - The port received a request for 

identification from an authenticator.
Authenticating - Authentication is in progress.
Held - Authenticator sent notice of failure. The 
supplicant port is waiting for the authenticator’s
held-period (page 59).

show port-access supplicant [[e] < port-list >] statistics

< port-list > ports configured