HP ProLiant ML330 G6 Manuale Utente
Hardware options installation 71
5.
Install the dedicated iLO 2 management port module.
6.
Using a T-15 Torx screwdriver, secure the dedicated iLO 2 management port module.
7.
Install the access panel.
8.
Do one of the following:
o
Close or install the tower bezel, as needed.
o
Slide the server back into the rack.
9.
Connect a network cable to the module, as needed.
10.
Power up the server (on page
HP Trusted Platform Module option
Use these instructions to install and enable a TPM on a supported server. This procedure includes three
sections:
1.
Installing the Trusted Platform Module board (on page