HP qms 4060 Manuale Utente

Memory

5-15

Additional Technical Information

* 2200KB is the minimum allowed for the Frame Buffer client.

Display List

Also known as K Mem Display, this client stores compressed repre-
sentations, or blocks, of the pages to be printed. It takes approxi-
mately one compressed block for a normal 8.5" x 11" (215.9 mm x 
279.4 mm) text page, four compressed blocks for an 8.5" x 11" 
(215.9 mm x 279.4 mm) page that includes some graphics, and as 
many as 500 compressed blocks for an extremely complex page.

Many pages of compressed blocks belonging to multiple print jobs 
can be stored at the same time in the display list. If enough memory is 
allocated to this memory client, a page can always be ready to print 
as soon as another page has been imaged to the print engine.

The amount of memory required for each compressed block is printer 
specific. The QMS 4060 Print System takes approximately 64 KB of 
memory from the display list for each compressed block. However, if a 
page includes raster image data (for example, TIFF or bitmap data), 
each compressed block will require much more memory.

Increasing the amount of memory in this client may improve printing 
throughput and minimize slowdowns due to collating or printing com-
plex pages. If your QMS 4060 Print System has a hard drive and the 
disk swap option is enabled the memory added to this client is taken 
from virtual memory. If your printer does not have a hard drive then 
the memory added to this client is taken from the amount of physical 
memory in your printer. It may be necessary to reduce memory added 
to another client before adding memory to the Display List. Check that 
the Frame Buffer still has the minimum amount of memory needed for 
your printing needs before reallocating this memory.

Statement

2200*

2200*

2200*

3752

Executive

2200*

2200*

3124

6248