HP qms 4060 Manuale Utente

Configuration 

Menu

4-9

Printer Configuration

at a time. The current input character flashes. Use the following but-
tons to change the current input character:

Once you have changed the current input character, use the following 
buttons to move the cursor to another input character:

To exit from the character selection process, move the cursor to the 
last character of the input field (the character farthest to the right) and 
press the Select button, or move to the first character of the input field 
(the character farthest to the left) and press the Menu button.

When you exit, the printer verifies character information and confirms 
it in the message window. If character information is valid, you’re 
returned to the previous menu; if it’s invalid, you’re returned to the 
input field. Press the Menu button to cancel any changes to the char-
acter information.

If the current character information is longer than the value that you 
need to enter, replace each extra character with a space. The printer 
interprets a space at the end of character information as a blank.

Example

To change the HP-GL emulation scaling percent, press the control 
panel buttons in the order shown in the following table. The printer 

Advance to the next choice for the current input 
character.

Return to the previous choice for the current input 
character.

Advance the cursor to the next character.

Return the cursor to the previous character.