HP qms 4060 Manuale Utente
Operator Control
Menu
QMS 4060 Print System Reference
4-28
Upper Inputbin
Use the Operator Control/Chain Option/Upper Chaining menu to
chain to the upper inputbin.
chain to the upper inputbin.
Custom Input Bins
This option allows you to set up the paper size for the optional custom
input tray. Since the tray can be installed in the upper, middle, or lower
tray positions there are three options under this menu—one for each
tray position.
input tray. Since the tray can be installed in the upper, middle, or lower
tray positions there are three options under this menu—one for each
tray position.
Default
On
Notes
The Operator Control/Chain Option menu must be set
to On before the setting in this menu takes effect.
to On before the setting in this menu takes effect.
Menu
Operator Control/Chain Option/Upper Chaining
Choices
On—Allow media to be pulled from the upper inputbin
if necessary.
Off—Don’t allow media to be pulled from the upper
inputbin.
Default
On
Notes
The Operator Control/Chain Option menu must be set
to On before the setting in this menu takes effect.
to On before the setting in this menu takes effect.
Menu
Operator Control/Custom Input Bin
Choices
Upper, Middle, or Lower
Default
The default setting for each tray position is letter
paper size.
paper size.
Notes
The choices for each tray position are letter, legal,
executive, A3, A4, A5, B4, B5, B4 (ISO), B5 (ISO),
11 x 17, Statement.
executive, A3, A4, A5, B4, B5, B4 (ISO), B5 (ISO),
11 x 17, Statement.